View UPG2227T5F-E2-A_1332710.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEC's L-BAND SP3T SWITCH UPG2227T5F
FEATURES
* LOW INSERTION LOSS: 0.45 dB TYP. @ 1.0 GHz 0.50 dB TYP. @ 2.0 GHz * HIGH ISOLATION: 21 dB TYP. @ 1.0 GHz * HIGH POWER: Pin (0.1 dB) = 33.0 dBm TYP. @ +2.7 V, 1.0 GHz * PACKAGE: 12-pin plastic QFN package (3.0 x 3.0 x 0.75 mm) * Pb FREE
DESCRIPTION
NEC's UPG2227T5F is a L-band SP3T GaAs FET switch for CDMA/PCS/GPS triple mode digital cellular telephone application. The device can operate from 500 MHz to 2.5 GHz with low insertion loss and high linearity.
APPLICATIONS
* CDMA/PCS/GPS triple mode digital cellular telephone * Short Range Wireless
ORDERING INFORMATION
PART NUMBER UPG2227T5F-E2-A PACKAGE 12-pin plastic QFN MARKING 2227 SUPPLYING FORM * Embossed tape 8 mm wide * Pin 1 indicates roll-in direction of tape * Qty 3 kpcs/reel * Pb Free
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2227T5F-A
Caution
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
UPG2227T5F PIN CONNECTIONS
(Top View)
9 8 7
(Bottom View)
7 8 9
PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12
PIN NAME Vcont1 RF1 GND GND RF2 Vcont2 GND RF3 Vcont3 GND ANT GND
10 11 12
6 5 4
6 5 4
10 11 12
1
2
3
3
2
1
TRUTH TABLE
GND GND ANT
Vcont1 RF1 GND
Vcont3 RF3 GND
GND
RF2
Vcont1 H L L
Vcont2 L H L
Vcont3 L L H
ANT-RF1 ON OFF OFF
Vcont2 ANT-RF2 OFF ON OFF
ANT-RF3 OFF OFF ON
UPG2227T5F ABSOLUTE MAXIMUM RATINGS (TA = 25C)
PARAMETER Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature SYMBOL Vcont Pin TA Tstg RATINGS -8.0 to +8.0 +36 -45 to +85 -55 to +150 UNIT V dBm C C
RECOMMENDED OPERATING RANGE (TA = 25C)
Parameter Switch Control Voltage (H) Switch Control Voltage (L) Symbol Vcont(H) Vcont(L) MIN. +2.4 -0.2 TYP. +2.7 0 MAX. +5.0 +0.2 Unit V V
UPG2227T5F ELECTRICAL CHARACTERISTICS
PARAMETER Insertion Loss
(TA = +25C, Vcont = +2.7 V/0 V, ZO = 50 , Off chip DC blocking capacitors value = 56 pF, unless otherwise specified)
SYMBOL LINS TEST CONDITIONS f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz Isolation ISL f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz Input Return Loss Output Return Loss 0.1 dB Gain Compression Input Power 1 dB Gain Compression Input Power 2nd Harmonics 3rd Harmonics 3rd Order Distortion Input Intercept Point RLin RLout Pin (0.1 dB) Pin (1 dB) 2f0 3f0 IIP3 f = 0.5 to 2.0 GHz f = 2.0 to 2.5 GHz f = 0.5 to 2.0 GHz f = 2.0 to 2.5 GHz f = 1.0 GHz f = 1.0 GHz f = 1.0 GHz @ Pin = +27 dBm f = 2.0 GHz @ Pin = +24 dBm f = 1.0 GHz @ Pin = +27 dBm f = 2.0 GHz @ Pin = +24 dBm f = 837 MHz/838 MHz @ 1 MHz Spacing Pin = +22 dBm each @ 2 Tone f = 1 880 MHz/1 881 MHz @ 1 MHz Spacing Pin = +21 dBm each @ 2 Tone Cross Modulation X-Mod f = 837 MHz/838 MHz @ 1 MHz Spacing Pin = +22 dBm each @ 2 Tone f = 880 MHz Pin = -27 dBm f = 1 880 MHz/1 881 MHz @ 1 MHz Spacing Pin = +21 dBm each @ 2 Tone f = 1 960 MHz Pin = -27 dBm Switch Control Speed Switch Control Current tSW Icont RF Non MIN. - - - 22 17 - 15 - 15 - 31.0 - 65 - 65 - - - - TYP. 0.45 0.50 0.55 26 21 20 20 20 20 20 33.0 34 75 75 75 75 64 63 -108 MAX. 0.60 0.70 - - - - - - - - - - - - - - - - - UNIT dB dB dB dB dB dB dB dB dB dB dBm dBm dBc dBc dBc dBc dBm dBm dBm
-
-110
-
dBm
- -
150 1
- 20
ns A
UPG2227T5F EVALUATION CIRCUIT
ANT LESD 56 pF
Note
1,000 pF Vcont1 56 pF RF1
1,000 pF Vcont3 56 pF RF3
56 pF
1,000 pF
RF2 Vcont2
Note Recommend attached LESD to antenna port for ESD protection. The application circuits and their parameters are for reference only and are not intended for actual design-ins.
UPG2227T5F PACKAGE DIMENSIONS 12-PIN PLASTIC QFN (UNIT: mm)
3.0 0.750.1
3.0
(Bottom View) 1.0 0.5 0.40.1
0.9
0.4
0.5
1.550.1
1.0
0.40.1
0.24+0.07 -0.05 0.40.1 1.550.1
Dimensions of pin No.1 indication
0.40.1
0.9
0.4
UPG2227T5F RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260
VPS
VP215
Wave Soldering
WS260
Partial Heating
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
05/10/2005
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.
5-8

▲Up To Search▲

Price & Availability of UPG2227T5F-E2-A

	To Download UPG2227T5F-E2-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .